1 in 2 Central Coast & Sydney properties will get termites!

Does your property have termites?

Call Surekill for your peace of mind.

  • We will inspect your property using the best Termite Location Equipment

  • Termite Inspection should be conducted at least annually

  • We email a detailed report with all Termite Inspections

Termite Location Equipment

Termatrac

The Termatrac has a built in moisture metre and thermal reading device to look for temperature variances in the wall. It also uses microwave technology like a depth sounder on a boat looking for fish. 

Thermal Reading Device

Snake Camera

A camera is used to look into the wall cavity. A small hole is drilled into the wall and then the snake camera is inserted into the wall, an image of the termite activity or damage is then produced on the hand held screen.

Moisture Metre

A Moisture Meter is used to locate moisture variances on internal walls. Moisture is one of the main conducive conditions for termites.

Detects Moisture

Donger

A donger is used to tap at the timber to see if it is hollow. The donger will pierce through soft timber. If the danger goes through the wood easily then there is usually evidence of termite damage or it could be wooed not caused by the timber being damp. If timber rot is found then termites might not be far away as they like soft wet timber.

Finds eaten timber

Flashlight

A flashlight is important when looking for termites as the Technician must search the sub floor and roof void. They are looking for termite leads and evidence of termite activity past and present.

Finds leads and mud casings

PPE Personal Protective Equipment

Technicians wear protective clothing when conducting a Termite Inspection as they have to crawl through the sub floor and roof void. 

Safety First

Please reload